Beko Condensate Drains
The electronically level-controlled condensate drain
Condensation occurs at virtually every point along the compressed air treatment process. In most cases, it contains oil and dirt particles that should not enter the compressed air system. We help you remove condensate from your compressed air and achieve the optimum quality for your application: with the BEKOMAT. The electronic level controlled condensate drain has become synonymous with efficient condensate discharge. Volume-controlled and with intelligent electronics to prevent compressed air losses, it minimises energy expenditure and costs. This is not only our view but that of many renowned compressor manufacturers who recommend the BEKOMAT as they regard it as the safest and most economical condensate discharge unit currently available on the market.
The condensate discharge requirements are ultimately determined by the purpose for which the treated compressed air is used. We aim at offering our customers optimised solutions for their specific applications. With our comprehensive range of condensate drains, we cater for virtually all compressor types and performance levels, system pressures and operating conditions – including of course highly specialised applications.
Condensate discharge without compressed air loss
If a float drain leaks, then high costs arise as a result of leaks. Time-controlled solenoid valves also cause compressed air losses. During the valve opening, expensively generated compressed air escapes unused into the environment. In contrast a level-controlled condensate drain guarantees discharge without any compressed air loss i.e. also energy loss. This not only saves energy and costs, but also CO2 emissions.
Comfortable and simplified maintenance
A service indicator informs punctually about the upcoming maintenance and/or exchange for the service unit. All parts which are subject to wear or are pressurised can be reached with one manual movement. Neither electrical installations nor the installation of seals and individual parts are necessary. The installation concept is also particularly user-friendly and time-saving: The device only has to be connected once electrically. The robust housing is also waterproof according to IP67. BEKOMAT 31U | 32U facilitates the connection to the compressed air system with an angle adaptor.
If the service unit of the BEKOMAT 33U is disconnected from the power supply and condensate receiver tank, then the supply tank always remains connected to the compressed air system. This saves time and effort during maintenance.
Robust and reliable
The standard design is made in corrosion-resistant aluminium, which makes the BEKOMAT particularly reliable and robust. A silver-coloured coating protects the outside of the housing. The BEKOMAT CO models are predestined for operating with oil-free or aggressive condensates. Their housing is additionally, completely glass bead blasted and protected by a high-quality hard coating.
Image right: Aluminium finish in the standard version, CO hard-coated for oil-free and aggressive condensates.
BEKOMAT 20 | 20FM for filters and water separators
The BEKOMAT 20 FM with integrated filter management (filter status time display and filter status control) is a cost-effective monitoring solution for the connected filter element. It is designed as a robust condensate drain for water separators, filters or similar applications and can be used both in systems with oil-lubricated as well as with oil-free compressors.
The plastic housing of the BEKOMAT 20 FM is equipped with an internal aluminium condensate container. The front panel is visible and can be operated from the top and the front.
With no-load valve especially for high pressure, multi-stage and turbo compressors
BEKOMAT 03/06/LA/LALP
Should the operating pressure of the compressor drop below 1.2 bar (e.g. with multi-stage compressors in the idling stage), then an additional no load valve opens. The condensate can then discharge without pressure. If the operating pressure exceeds 1.2 bar again, then the no-load valve closes and the BEKOMAT operates in its standard function.
The LP version has been specially designed for operating pressures that can drop to as low as 0.4 bar. High pressure versions are available for operating pressures up to PN 25 and/or PN 63 bar.
For applications in vacuum systems
BEKOMAT 03/06 VAC
The BEKOMAT VAC condensate drain has been specially designed for draining condensate and other media from negative pressure and vacuum systems with an operating pressure of 0.1 to 1.8 bar (absolute). They are also suitable for ongoing, process engineering processes under normal atmosphere. Designed to fulfil your specific requirements, the robust, level-controlled condensate drain is designed and built as a hard-coated version or as stainless steel.
For applications in large compressors
BEKOMAT 08/09
The complete housing of this BEKOMAT condensate drain is made of cast stainless steel and is therefore designed for use in aggressive atmospheres, as well as for the discharge of condensates from special gas compression. They are mainly utilised in petroleum plants and refineries, in the petrochemical industry and in crude or mineral oil plants. These are the largest electronically level-controlled condensate drain systems available on the market and have been specially designed and built for these requirements.
Enquire Today
Established in 1970, AE Industrial & Air Equipment Ltd is a leading company engaged in the supply, installation and maintenance of compressed air, pneumatic controls and product finishing equipment and systems.
Complete our enquiry form and a member of our sales team will be in touch as soon as possible.
Full Name